[ 0.000000] Linux version 2.6.22-9-generic (buildd@palmer) (gcc version 4.1.3 20070718 (prerelease) (Ubuntu 4.1.2-14ubuntu1)) #1 SMP Fri Aug 3 00:50:37 GMT 2007 (Ubuntu 2.6.22-9.25-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f681400 (usable) [ 0.000000] BIOS-e820: 000000007f681400 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved) [ 0.000000] BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] 1142MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 521857) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 521857 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 521857 [ 0.000000] On node 0 totalpages: 521857 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2285 pages used for memmap [ 0.000000] HighMem zone: 290196 pages, LIFO batch:31 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000FC0E0, 0014 (r0 DELL ) [ 0.000000] ACPI: RSDT 7F681A0E, 0044 (r1 DELL M07 27D70515 ASL 61) [ 0.000000] ACPI: FACP 7F682800, 0074 (r1 DELL M07 27D70515 ASL 61) [ 0.000000] ACPI: DSDT 7F683400, 4BBE (r1 INT430 SYSFexxx 1001 INTL 20050624) [ 0.000000] ACPI: FACS 7F691C00, 0040 [ 0.000000] ACPI: HPET 7F682F00, 0038 (r1 DELL M07 1 ASL 61) [ 0.000000] ACPI: APIC 7F683000, 0068 (r1 DELL M07 27D70515 ASL 47) [ 0.000000] ACPI: ASF! 7F682C00, 007E (r32 DELL M07 27D70515 ASL 61) [ 0.000000] ACPI: MCFG 7F682FC0, 003E (r16 DELL M07 27D70515 ASL 61) [ 0.000000] ACPI: SLIC 7F68309C, 0176 (r1 DELL M07 27D70515 ASL 61) [ 0.000000] ACPI: TCPA 7F683300, 0032 (r1 DELL M07 27D70515 ASL 61) [ 0.000000] ACPI: SSDT 7F681A95, 04DC (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) [ 0.000000] Built 1 zonelists. Total pages: 517780 [ 0.000000] Kernel command line: root=UUID=4b646d54-dec9-4ce5-9e04-9dca80554725 ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1197.027 MHz processor. [ 7.823448] Console: colour VGA+ 80x25 [ 7.823800] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 7.824201] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 7.939703] Memory: 2058432k/2087428k available (2010k kernel code, 27720k reserved, 917k data, 364k init, 1169924k highmem) [ 7.939715] virtual kernel memory layout: [ 7.939717] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 7.939718] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 7.939720] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 7.939721] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 7.939723] .init : 0xc03e1000 - 0xc043c000 ( 364 kB) [ 7.939724] .data : 0xc02f6806 - 0xc03dbe64 ( 917 kB) [ 7.939726] .text : 0xc0100000 - 0xc02f6806 (2010 kB) [ 7.939730] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 7.939783] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 7.939819] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 7.939826] hpet0: 3 64-bit timers, 14318180 Hz [ 8.020805] Calibrating delay using timer specific routine.. 2396.98 BogoMIPS (lpj=4793972) [ 8.020837] Security Framework v1.0.0 initialized [ 8.020846] SELinux: Disabled at boot. [ 8.020865] Mount-cache hash table entries: 512 [ 8.021037] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 8.021049] monitor/mwait feature present. [ 8.021052] using mwait in idle threads. [ 8.021058] CPU: L1 I cache: 32K, L1 D cache: 32K [ 8.021061] CPU: L2 cache: 2048K [ 8.021065] CPU: Physical Processor ID: 0 [ 8.021067] CPU: Processor Core ID: 0 [ 8.021070] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 8.021082] Compat vDSO mapped to ffffe000. [ 8.021102] Checking 'hlt' instruction... OK. [ 8.036942] SMP alternatives: switching to UP code [ 8.037530] Early unpacking initramfs... done [ 8.468750] ACPI: Core revision 20070126 [ 8.468807] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 8.472193] CPU0: Intel(R) Core(TM)2 CPU U7600 @ 1.20GHz stepping 02 [ 8.472215] SMP alternatives: switching to SMP code [ 8.472311] Booting processor 1/1 eip 3000 [ 10.409303] Initializing CPU#1 [ 10.488896] Calibrating delay using timer specific routine.. 2394.04 BogoMIPS (lpj=4788092) [ 10.488904] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 10.488911] monitor/mwait feature present. [ 10.488914] CPU: L1 I cache: 32K, L1 D cache: 32K [ 10.488917] CPU: L2 cache: 2048K [ 10.488920] CPU: Physical Processor ID: 0 [ 10.488922] CPU: Processor Core ID: 1 [ 10.488924] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 8.565208] CPU1: Intel(R) Core(TM)2 CPU U7600 @ 1.20GHz stepping 02 [ 8.565236] Total of 2 processors activated (4791.03 BogoMIPS). [ 8.565445] ENABLING IO-APIC IRQs [ 8.565657] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 8.712527] checking TSC synchronization [CPU#0 -> CPU#1]: [ 8.732528] Measured 2304778923 cycles TSC warp between CPUs, turning off TSC clock. [ 0.664000] Marking TSC unstable due to: check_tsc_sync_source failed. [ 0.668000] Brought up 2 CPUs [ 1.020000] migration_cost=4000 [ 1.020000] Booting paravirtualized kernel on bare hardware [ 1.020000] Time: 7:25:12 Date: 07/08/107 [ 1.020000] NET: Registered protocol family 16 [ 1.020000] EISA bus registered [ 1.020000] ACPI: bus type pci registered [ 1.052000] PCI: PCI BIOS revision 2.10 entry at 0xfaea6, last bus=12 [ 1.052000] PCI: Using configuration type 1 [ 1.052000] Setting up standard PCI resources [ 1.060000] ACPI: EC: Look up EC in DSDT [ 1.076000] ACPI Warning (tbutils-0158): Incorrect checksum in table [TCPA] - 00, should be 96 [20070126] [ 1.076000] ACPI: SSDT 7F681A52, 0043 (r1 LMPWR DELLLOM 1001 INTL 20050624) [ 1.076000] ACPI: Interpreter enabled [ 1.076000] ACPI: (supports S0 S3 S4 S5) [ 1.076000] ACPI: Using IOAPIC for interrupt routing [ 1.112000] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 1.112000] PCI: Probing PCI hardware (bus 00) [ 1.112000] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 1.112000] PCI quirk: region 1080-10bf claimed by ICH6 GPIO [ 1.112000] PCI: Transparent bridge - 0000:00:1e.0 [ 1.112000] PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses') [ 1.112000] Please report the result to linux-kernel to fix this permanently [ 1.112000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.112000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 1.112000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 1.112000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 1.112000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXP0._PRT] [ 1.136000] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 1.136000] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7) [ 1.136000] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *3 [ 1.136000] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11) [ 1.136000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 1.136000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 1.136000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 1.136000] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 1.136000] Linux Plug and Play Support v0.97 (c) Adam Belay [ 1.136000] pnp: PnP ACPI init [ 1.136000] ACPI: bus type pnp registered [ 1.184000] pnp: PnP ACPI: found 13 devices [ 1.184000] ACPI: ACPI bus type pnp unregistered [ 1.184000] PnPBIOS: Disabled by ACPI PNP [ 1.184000] PCI: Using ACPI for IRQ routing [ 1.184000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 1.240000] NET: Registered protocol family 8 [ 1.240000] NET: Registered protocol family 20 [ 1.240000] pnp: 00:00: iomem range 0x0-0x9fbff could not be reserved [ 1.240000] pnp: 00:00: iomem range 0x9fc00-0x9ffff could not be reserved [ 1.240000] pnp: 00:00: iomem range 0xc0000-0xcffff could not be reserved [ 1.240000] pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 1.240000] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 1.240000] pnp: 00:02: ioport range 0x1000-0x1005 has been reserved [ 1.240000] pnp: 00:02: ioport range 0x1008-0x100f has been reserved [ 1.240000] pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved [ 1.240000] pnp: 00:03: ioport range 0x1006-0x1007 has been reserved [ 1.240000] pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved [ 1.240000] pnp: 00:03: ioport range 0x1060-0x107f has been reserved [ 1.240000] pnp: 00:03: ioport range 0x1080-0x10bf has been reserved [ 1.240000] pnp: 00:03: ioport range 0x10c0-0x10df has been reserved [ 1.240000] pnp: 00:08: ioport range 0xc80-0xcaf has been reserved [ 1.240000] pnp: 00:08: ioport range 0xcc0-0xcff could not be reserved [ 1.240000] pnp: 00:08: ioport range 0x910-0x91f has been reserved [ 1.240000] pnp: 00:08: ioport range 0x920-0x92f has been reserved [ 1.240000] pnp: 00:08: ioport range 0xcbc-0xcbf has been reserved [ 1.240000] pnp: 00:08: ioport range 0x930-0x97f has been reserved [ 1.240000] pnp: 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved [ 1.240000] pnp: 00:0c: ioport range 0xcb0-0xcbb has been reserved [ 1.240000] pnp: 00:0c: iomem range 0xfed40000-0xfed44fff could not be reserved [ 1.244000] Time: hpet clocksource has been installed. [ 1.244000] Switched to high resolution mode on CPU 0 [ 1.244000] Switched to high resolution mode on CPU 1 [ 1.268000] PCI: Bridge: 0000:00:1c.0 [ 1.268000] IO window: disabled. [ 1.268000] MEM window: disabled. [ 1.268000] PREFETCH window: disabled. [ 1.268000] PCI: Bridge: 0000:00:1c.1 [ 1.268000] IO window: disabled. [ 1.268000] MEM window: efd00000-efdfffff [ 1.268000] PREFETCH window: disabled. [ 1.268000] PCI: Bridge: 0000:00:1c.2 [ 1.268000] IO window: disabled. [ 1.268000] MEM window: efc00000-efcfffff [ 1.268000] PREFETCH window: disabled. [ 1.268000] PCI: Bus 3, cardbus bridge: 0000:02:01.0 [ 1.268000] IO window: 00002000-000020ff [ 1.268000] IO window: 00002400-000024ff [ 1.268000] PREFETCH window: 88000000-8bffffff [ 1.268000] MEM window: 8c000000-8fffffff [ 1.268000] PCI: Bridge: 0000:00:1e.0 [ 1.268000] IO window: 2000-2fff [ 1.268000] MEM window: efb00000-efbfffff [ 1.268000] PREFETCH window: 88000000-8bffffff [ 1.268000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 1.268000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 1.268000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 1.268000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 1.268000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 1.268000] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 1.268000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 1.268000] PCI: Enabling device 0000:02:01.0 (0000 -> 0003) [ 1.268000] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 1.268000] NET: Registered protocol family 2 [ 1.312000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.312000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 1.312000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 1.312000] TCP: Hash tables configured (established 131072 bind 65536) [ 1.312000] TCP reno registered [ 1.328000] checking if image is initramfs... it is [ 2.180000] Freeing initrd memory: 6669k freed [ 2.180000] audit: initializing netlink socket (disabled) [ 2.180000] audit(1186557911.744:1): initialized [ 2.180000] highmem bounce pool size: 64 pages [ 2.180000] VFS: Disk quotas dquot_6.5.1 [ 2.184000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.184000] io scheduler noop registered [ 2.184000] io scheduler anticipatory registered [ 2.184000] io scheduler deadline registered [ 2.184000] io scheduler cfq registered (default) [ 2.184000] Boot video device is 0000:00:02.0 [ 2.184000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 2.184000] assign_interrupt_mode Found MSI capability [ 2.184000] Allocate Port Service[0000:00:1c.0:pcie00] [ 2.184000] Allocate Port Service[0000:00:1c.0:pcie02] [ 2.184000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 2.184000] assign_interrupt_mode Found MSI capability [ 2.184000] Allocate Port Service[0000:00:1c.1:pcie00] [ 2.184000] Allocate Port Service[0000:00:1c.1:pcie02] [ 2.184000] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 2.184000] assign_interrupt_mode Found MSI capability [ 2.184000] Allocate Port Service[0000:00:1c.2:pcie00] [ 2.184000] Allocate Port Service[0000:00:1c.2:pcie02] [ 2.184000] isapnp: Scanning for PnP cards... [ 2.536000] isapnp: No Plug & Play device found [ 2.568000] Real Time Clock Driver v1.12ac [ 2.568000] hpet_resources: 0xfed00000 is busy [ 2.568000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 2.568000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 2.568000] input: Macintosh mouse button emulation as /class/input/input0 [ 2.568000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.576000] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.576000] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.576000] mice: PS/2 mouse device common for all mice [ 2.576000] EISA: Probing bus 0 at eisa.0 [ 2.576000] EISA: Cannot allocate resource for mainboard [ 2.576000] Cannot allocate resource for EISA slot 1 [ 2.576000] Cannot allocate resource for EISA slot 2 [ 2.576000] EISA: Detected 0 cards. [ 2.576000] TCP cubic registered [ 2.576000] NET: Registered protocol family 1 [ 2.576000] Using IPI No-Shortcut mode [ 2.576000] Magic number: 3:726:419 [ 2.576000] Freeing unused kernel memory: 364k freed [ 2.584000] input: AT Translated Set 2 keyboard as /class/input/input1 [ 3.852000] Capability LSM initialized [ 3.892000] ACPI: SSDT 7F6821BC, 01C0 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 3.892000] ACPI: SSDT 7F681F71, 01C6 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 3.892000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 3.892000] ACPI: Processor [CPU0] (supports 8 throttling states) [ 3.896000] ACPI: SSDT 7F68237C, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 3.896000] ACPI: SSDT 7F682137, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 3.896000] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 3.896000] ACPI: Processor [CPU1] (supports 8 throttling states) [ 3.900000] ACPI: Thermal Zone [THM] (31 C) [ 4.456000] usbcore: registered new interface driver usbfs [ 4.456000] usbcore: registered new interface driver hub [ 4.456000] usbcore: registered new device driver usb [ 4.456000] USB Universal Host Controller Interface driver v3.0 [ 4.456000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 4.456000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 4.456000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 4.456000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 4.456000] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80 [ 4.456000] usb usb1: configuration #1 chosen from 1 choice [ 4.456000] hub 1-0:1.0: USB hub found [ 4.456000] hub 1-0:1.0: 2 ports detected [ 4.512000] SCSI subsystem initialized [ 4.528000] libata version 2.21 loaded. [ 4.560000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 4.560000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 4.560000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 4.560000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 4.560000] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60 [ 4.560000] usb usb2: configuration #1 chosen from 1 choice [ 4.560000] hub 2-0:1.0: USB hub found [ 4.560000] hub 2-0:1.0: 2 ports detected [ 4.668000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22 [ 4.668000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 4.668000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 4.668000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 4.668000] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40 [ 4.668000] usb usb3: configuration #1 chosen from 1 choice [ 4.668000] hub 3-0:1.0: USB hub found [ 4.668000] hub 3-0:1.0: 2 ports detected [ 4.772000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23 [ 4.772000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 4.772000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 4.772000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 4.772000] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20 [ 4.772000] usb usb4: configuration #1 chosen from 1 choice [ 4.772000] hub 4-0:1.0: USB hub found [ 4.772000] hub 4-0:1.0: 2 ports detected [ 4.804000] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 4.876000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 [ 4.876000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 4.876000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 4.876000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 4.876000] ehci_hcd 0000:00:1d.7: debug port 1 [ 4.876000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 4.876000] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000 [ 4.880000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 4.880000] usb usb5: configuration #1 chosen from 1 choice [ 4.880000] hub 5-0:1.0: USB hub found [ 4.880000] hub 5-0:1.0: 8 ports detected [ 4.984000] ata_piix 0000:00:1f.1: version 2.11 [ 4.984000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 4.984000] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 4.984000] scsi0 : ata_piix [ 4.984000] scsi1 : ata_piix [ 4.984000] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14 [ 4.984000] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15 [ 5.000000] Clocksource tsc unstable (delta = -236747866 ns) [ 5.148000] ata1.00: ATA-6: TOSHIBA MK8009GAH, BS011G, max UDMA/100 [ 5.148000] ata1.00: 156301488 sectors, multi 8: LBA48 [ 5.156000] ata1.00: configured for UDMA/100 [ 5.156000] ata2: port disabled. ignoring. [ 5.156000] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8009GA BS01 PQ: 0 ANSI: 5 [ 5.160000] tg3.c:v3.77 (May 31, 2007) [ 5.160000] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 5.160000] PCI: Setting latency timer of device 0000:09:00.0 to 64 [ 5.164000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 5.164000] sd 0:0:0:0: [sda] Write Protect is off [ 5.164000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.164000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.164000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 5.164000] sd 0:0:0:0: [sda] Write Protect is off [ 5.164000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.164000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.164000] sda:<6>eth0: Tigon3 [partno(BCM95752) rev 6002 PHY(5752)] (PCI Express) 10/100/1000Base-T Ethernet 00:1c:23:00:6b:7f [ 5.176000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 5.176000] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 5.180000] ACPI: PCI Interrupt 0000:02:01.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 5.204000] sda1 sda2 sda3 [ 5.216000] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.232000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[efbff800-efbfffff] Max Packet=[2048] IR/IT contexts=[4/4] [ 5.240000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.328000] usb 1-2: device not accepting address 2, error -71 [ 5.492000] Attempting manual resume [ 5.492000] swsusp: Resume From Partition 8:2 [ 5.492000] PM: Checking swsusp image. [ 5.492000] PM: Resume from disk failed. [ 5.500000] swsusp: Basic memory bitmaps created [ 5.512000] swsusp: Basic memory bitmaps freed [ 5.564000] kjournald starting. Commit interval 5 seconds [ 5.564000] EXT3-fs: mounted filesystem with ordered data mode. [ 6.060000] usb 1-2: new full speed USB device using uhci_hcd and address 4 [ 6.212000] usb 1-2: configuration #1 chosen from 1 choice [ 6.212000] hub 1-2:1.0: USB hub found [ 6.216000] hub 1-2:1.0: 4 ports detected [ 6.508000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[444fc00011a70470] [ 6.548000] usb 1-2.3: new full speed USB device using uhci_hcd and address 5 [ 6.660000] usb 1-2.3: configuration #1 chosen from 1 choice [ 6.660000] hub 1-2.3:1.0: USB hub found [ 6.664000] hub 1-2.3:1.0: 3 ports detected [ 6.988000] usb 1-2.4: new full speed USB device using uhci_hcd and address 6 [ 7.144000] usb 1-2.4: configuration #1 chosen from 1 choice [ 7.352000] usb 1-2.3.2: new full speed USB device using uhci_hcd and address 7 [ 7.468000] usb 1-2.3.2: configuration #1 chosen from 1 choice [ 14.788000] PM: Writing back config space on device 0000:09:00.0 at offset c (was fe320000, writing 0) [ 14.788000] PM: Writing back config space on device 0000:09:00.0 at offset 1 (was 100506, writing 100106) [ 16.048000] Linux agpgart interface v0.102 (c) Dave Jones [ 16.068000] agpgart: Detected an Intel 945GM Chipset. [ 16.072000] agpgart: Detected 7932K stolen memory. [ 16.088000] agpgart: AGP aperture is 256M @ 0xd0000000 [ 16.112000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 16.116000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.468000] Yenta: CardBus bridge found at 0000:02:01.0 [1028:0201] [ 16.492000] NET: Registered protocol family 17 [ 16.500000] input: PC Speaker as /class/input/input2 [ 16.536000] iTCO_vendor_support: vendor-support=0 [ 16.536000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 16.592000] sdhci: Secure Digital Host Controller Interface driver [ 16.592000] sdhci: Copyright(c) Pierre Ossman [ 16.596000] Yenta: ISA IRQ mask 0x0cb8, PCI irq 19 [ 16.596000] Socket status: 30000006 [ 16.596000] Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06 [ 16.596000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff [ 16.596000] cs: IO port probe 0x2000-0x2fff: clean. [ 16.596000] pcmcia: parent PCI bridge Memory window: 0xefb00000 - 0xefbfffff [ 16.596000] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff [ 16.596000] sdhci: SDHCI controller found at 0000:02:01.2 [1180:0822] (rev 18) [ 16.596000] ACPI: PCI Interrupt 0000:02:01.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 16.600000] mmc0: SDHCI at 0xefbff700 irq 18 DMA [ 16.912000] Bluetooth: Core ver 2.11 [ 16.912000] NET: Registered protocol family 31 [ 16.912000] Bluetooth: HCI device and connection manager initialized [ 16.912000] Bluetooth: HCI socket layer initialized [ 17.012000] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.0.0d [ 17.012000] iwl4965: Copyright(c) 2003-2007 Intel Corporation [ 17.012000] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 17.012000] PCI: Setting latency timer of device 0000:0c:00.0 to 64 [ 17.012000] iwl4965: Detected Intel Wireless WiFi Link 4965AGN [ 17.024000] input: PS/2 Mouse as /class/input/input3 [ 17.024000] Bluetooth: HCI USB driver ver 2.9 [ 17.044000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input4 [ 17.048000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 17.048000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 17.172000] intel_rng: FWH not detected [ 17.252000] usbcore: registered new interface driver hci_usb [ 17.252000] cs: IO port probe 0x100-0x3af: clean. [ 17.256000] cs: IO port probe 0x3e0-0x4ff: clean. [ 17.256000] cs: IO port probe 0x820-0x8ff: clean. [ 17.256000] cs: IO port probe 0xc00-0xcf7: clean. [ 17.256000] cs: IO port probe 0xa00-0xaff: clean. [ 17.340000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 17.340000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 17.348000] iwl4965: Channel 14 [2.4GHz] is Tx only -- skipping. [ 17.348000] iwl4965: Channel 183 [5.2GHz] is Tx only -- skipping. [ 17.348000] iwl4965: Channel 184 [5.2GHz] is Tx only -- skipping. [ 17.348000] iwl4965: Channel 185 [5.2GHz] is Tx only -- skipping. [ 17.348000] iwl4965: Channel 187 [5.2GHz] is Tx only -- skipping. [ 17.348000] iwl4965: Channel 188 [5.2GHz] is Tx only -- skipping. [ 17.348000] iwl4965: Channel 189 [5.2GHz] is Tx only -- skipping. [ 17.348000] iwl4965: Channel 192 [5.2GHz] is Tx only -- skipping. [ 17.348000] iwl4965: Channel 196 [5.2GHz] is Tx only -- skipping. [ 17.348000] iwl4965: Channel 7 [5.2GHz] is Tx only -- skipping. [ 17.348000] iwl4965: Channel 8 [5.2GHz] is Tx only -- skipping. [ 17.348000] iwl4965: Channel 11 [5.2GHz] is Tx only -- skipping. [ 17.348000] iwl4965: Channel 12 [5.2GHz] is Tx only -- skipping. [ 17.348000] iwl4965: Channel 16 [5.2GHz] is Tx only -- skipping. [ 17.348000] iwl4965: Channel 34 [5.2GHz] is Tx only -- skipping. [ 17.348000] iwl4965: Channel 38 [5.2GHz] is Tx only -- skipping. [ 17.348000] iwl4965: Channel 42 [5.2GHz] is Tx only -- skipping. [ 17.348000] iwl4965: Channel 46 [5.2GHz] is Tx only -- skipping. [ 17.348000] iwl4965: Channel 145 [5.2GHz] is Tx only -- skipping. [ 17.348000] iwl4965: Channel 149 [5.2GHz] is Tx only -- skipping. [ 17.348000] iwl4965: Channel 153 [5.2GHz] is Tx only -- skipping. [ 17.348000] iwl4965: Channel 157 [5.2GHz] is Tx only -- skipping. [ 17.348000] iwl4965: Channel 161 [5.2GHz] is Tx only -- skipping. [ 17.348000] iwl4965: Channel 165 [5.2GHz] is Tx only -- skipping. [ 17.348000] iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels [ 17.348000] wmaster0: Selected rate control algorithm 'iwl-4965-rs' [ 17.436000] iwl4965: Unhandled INTA bits 0x04000000 [ 17.436000] iwl4965: Disabled INTA bits 0x04000000 were pending [ 17.436000] iwl4965: with FH_INT = 0x00010000 [ 17.444000] iwl4965: REPLY_CT_KILL_CONFIG_CMD succeeded [ 17.900000] fuse init (API version 7.8) [ 17.968000] lp: driver loaded but no devices found [ 17.996000] tg3: eth0: Link is up at 1000 Mbps, full duplex. [ 17.996000] tg3: eth0: Flow control is off for TX and off for RX. [ 18.016000] Adding 4586548k swap on /dev/disk/by-uuid/92562eb7-31e7-4607-aa16-0784008c926d. Priority:-1 extents:1 across:4586548k [ 18.152000] EXT3 FS on sda1, internal journal [ 18.416000] kjournald starting. Commit interval 5 seconds [ 18.416000] EXT3 FS on sda3, internal journal [ 18.416000] EXT3-fs: mounted filesystem with ordered data mode. [ 18.784000] hda_intel: azx_get_response timeout, switching to polling mode... [ 23.580000] ACPI: Battery Slot [BAT0] (battery present) [ 23.596000] ACPI: ACPI Dock Station Driver [ 23.636000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 23.636000] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 23.664000] input: Lid Switch as /class/input/input5 [ 23.664000] ACPI: Lid Switch [LID] [ 23.668000] input: Power Button (CM) as /class/input/input6 [ 23.668000] ACPI: Power Button (CM) [PBTN] [ 23.668000] input: Sleep Button (CM) as /class/input/input7 [ 23.668000] ACPI: Sleep Button (CM) [SBTN] [ 23.788000] ACPI: AC Adapter [AC] (on-line) [ 26.224000] NET: Registered protocol family 10 [ 26.224000] lo: Disabled Privacy Extensions [ 26.224000] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 30.112000] [drm] Initialized drm 1.1.0 20060810 [ 30.116000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 30.116000] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 30.744000] ppdev: user-space parallel port driver [ 42.048000] eth0: no IPv6 routers present [ 42.148000] Bluetooth: L2CAP ver 2.8 [ 42.148000] Bluetooth: L2CAP socket layer initialized [ 42.392000] Bluetooth: RFCOMM socket layer initialized [ 42.392000] Bluetooth: RFCOMM TTY layer initialized [ 42.392000] Bluetooth: RFCOMM ver 1.8