Welcome to minicom 2.8 OPTIONS: I18n Port /dev/ttyUSB0, 10:20:16 Press CTRL-A Z for help on special keys U-Boot SPL 2021.10 (Apr 15 2023 - 23:17:57 +0000) DDR version: dc2e84f0. Trying to boot from MMC2 OpenSBI v1.0-11-gce4c0188 ____ _____ ____ _____ / __ \ / ____| _ \_ _| | | | |_ __ ___ _ __ | (___ | |_) || | | | | | '_ \ / _ \ '_ \ \___ \| _ < | | | |__| | |_) | __/ | | |____) | |_) || |_ \____/| .__/ \___|_| |_|_____/|____/_____| | | |_| fdt_reset_driver_init: gpio-restart init failed, -1001 Platform Name : Pine64 Star64 Platform Features : medeleg Platform HART Count : 5 Platform IPI Device : aclint-mswi Platform Timer Device : aclint-mtimer @ 4000000Hz Platform Console Device : uart8250 Platform HSM Device : --- Platform Reboot Device : --- Platform Shutdown Device : --- Firmware Base : 0x40000000 Firmware Size : 320 KB Runtime SBI Version : 0.3 Domain0 Name : root Domain0 Boot HART : 1 Domain0 HARTs : 0*,1*,2*,3*,4* Domain0 Region00 : 0x0000000002000000-0x000000000200ffff (I) Domain0 Region01 : 0x0000000040000000-0x000000004007ffff () Domain0 Region02 : 0x0000000000000000-0xffffffffffffffff (R,W,X) Domain0 Next Address : 0x0000000040200000 Domain0 Next Arg1 : 0x0000000042200000 Domain0 Next Mode : S-mode Domain0 SysReset : yes Boot HART ID : 1 Boot HART Domain : root Boot HART ISA : rv64imafdcbsux Boot HART Features : scounteren,mcounteren,mcountinhibit Boot HART PMP Count : 16 Boot HART PMP Granularity : 4096 Boot HART PMP Address Bits: 34 Boot HART MHPM Count : 2 Boot HART MIDELEG : 0x0000000000000222 Boot HART MEDELEG : 0x000000000000b109 U-Boot 2021.10 (Apr 15 2023 - 23:17:57 +0000) CPU: rv64imacu Model: Pine64 Star64 DRAM: 4 GiB MMC: sdio0@16010000: 0, sdio1@16020000: 1 Loading Environment from SPIFlash... SF: Detected gd25lq128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB *** Warning - bad CRC, using default environment StarFive EEPROM format v2 --------EEPROM INFO-------- Vendor : PINE64 Product full SN: STAR64V1-2310-D004E000-0000000a data version: 0x2 PCB revision: 0xc1 BOM revision: A Ethernet MAC0 address: 6c:cf:39:00:75:6b Ethernet MAC1 address: 6c:cf:39:00:75:6c --------EEPROM INFO-------- In: serial Out: serial Err: serial Model: Pine64 Star64 Net: eth0: ethernet@16030000, eth1: ethernet@16040000 bootmode sd device 1 Card did not respond to voltage select! : -110 Hit any key to stop autoboot: 0 1562 bytes read in 7 ms (217.8 KiB/s) Importing environment from mmc1 ... switch to partitions #0, OK mmc1 is current device 14718580 bytes read in 637 ms (22 MiB/s) ## Loading kernel from FIT Image at a0000000 ... Using 'conf-starfive_jh7110-pine64-star64.dtb' configuration Trying 'kernel-1' kernel subimage Description: Linux kernel Type: Kernel Image Compression: gzip compressed Data Start: 0xa00000f0 Data Size: 9346703 Bytes = 8.9 MiB Architecture: RISC-V OS: Linux Load Address: 0x40200000 Entry Point: 0x40200000 Hash algo: sha256 Hash value: ca4e8192a98d9eb5b1251a0d48b8ceda48ae72355d71d31df4efba2f349b68e7 Verifying Hash Integrity ... sha256+ OK ## Loading ramdisk from FIT Image at a0000000 ... Using 'conf-starfive_jh7110-pine64-star64.dtb' configuration Trying 'ramdisk-1' ramdisk subimage Description: star64-image-initramfs Type: RAMDisk Image Compression: uncompressed Data Start: 0xa08f5a14 Data Size: 5322395 Bytes = 5.1 MiB Architecture: RISC-V OS: Linux Load Address: 0x46100000 Entry Point: unavailable Hash algo: sha256 Hash value: dd93784769b6b1bfadc0afcafffa16f01fd26947fb756ab1704b9a92f3225e99 Verifying Hash Integrity ... sha256+ OK Loading ramdisk from 0xa08f5a14 to 0x46100000 ## Loading fdt from FIT Image at a0000000 ... Using 'conf-starfive_jh7110-pine64-star64.dtb' configuration Trying 'fdt-starfive_jh7110-pine64-star64.dtb' fdt subimage Description: Flattened Device Tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0xa08ea0a4 Data Size: 47245 Bytes = 46.1 KiB Architecture: RISC-V Load Address: 0x46000000 Hash algo: sha256 Hash value: b04d973929c8fa4c2d73de459308283db6748cefd33689cd41a9a997b5453f20 Verifying Hash Integrity ... sha256+ OK Loading fdt from 0xa08ea0a4 to 0x46000000 Booting using the fdt blob at 0x46000000 Uncompressing Kernel Image Booting kernel in ## Flattened Device Tree blob at 46000000 Booting using the fdt blob at 0x46000000 Using Device Tree in place at 0000000046000000, end 000000004600efff Starting kernel ... clk u2_dw_i2c_clk_core already disabled clk u2_dw_i2c_clk_apb already disabled clk u5_dw_i2c_clk_core already disabled clk u5_dw_i2c_clk_apb already disabled [ 0.000000] Linux version 5.15.0 (oe-user@oe-host) (riscv64-pine64-linux-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP Thu A3 [ 0.000000] OF: fdt: Ignoring memory range 0x40000000 - 0x40200000 ...